Skip to content

标签:ATI

ATI 发布 10.7 for Linux 驱动

  2010年5月26日,ATI 发布 10.7 for Linux 驱动。

  • Applying display rotation using Catalyst™ Control Center or XRandR no longer causes display to turn blank with mouse cursor  
  • Disabling the primary display in clone/dual-head mode no longer causes Catalyst™ Control Center not to launch after X restart 
  • CrossFire™ can now be enabled properly on the first Gemimi card under a 2 Gemini multi-adapter configuration 
  • Xserver no longer fails when applying "Maintain Aspect Ratio" option from GPU scaling at maximum resolution 
  • [SUSE] Desktop corruption no longer visible after applying rotation using Catalyst™ Control Center and restarting X 
  • Enabling a second ASIC without a monitor connected no longer causes black screen and X window not launching when startx is executed 
  • [Ubuntu 10.04]  X segmentation fault no longer occur at startup on multi-ASIC systems 
  • Catalyst™ Control Center: Gamma control changes no longer affect the wrong display in clone mode 
  • Switching to clone mode by pressing Fn+F4 now functions properly after connecting an external VGA monitor 
  • X-window no longer fails with some ATI card plugged in NV’s C51 IGP board 

    下载该驱动

    Release Notes

Leave a Comment

ATI 发布 10.5 for Linux 驱动

    2010年5月26日,ATI 发布 10.5 for Linux 驱动。

  • Enabling Hybrid Crossfire™ no longer causes dmesg to report an error after startingX
  • Screen no longer turns blank if the other monitor is unplugged in dual-head mode
  • [RHEL 5.4  x86_64] Kernel panic no longer occurs during system hibernation withPCI cards
  • [PowerXpress] Turning off the discrete card no longer causes the system to report afailure
  • 1080i30 and 1080i25 HDTV modes can now be applied for HDMI/DVI/DP displays
  • The primary display will now have the correct default resolution when multiplemonitors, with different size and resolutions, are connected
  • dmseg will no longer report an error during hibernation
  • Resuming from sleep no longer causes the display number overlay to become corrupted

    下载该驱动

    Release Notes

Leave a Comment

催化剂10.5正式发布 老卡迎接3D

    又是临近月底,AMD今天正式发布了本月的显卡驱动包催化剂10.5,加入了几项新特性,尤其是前两代老卡也能支持3D立体显示了。本次发布的催化 剂10.5显示驱动5月4日就已编译完成版本号为8.732.0, 支持Radeon HD 2000-5000全系列桌面显卡和相应的集成、多媒体、专业卡,操作系统则支持Windows XP/Vista/7、Linux。配套的催化剂驱动中心、CrossFireX优化档案、芯片组南桥驱动等也都已经更新到10.5版本。

 

催化剂10.5正式发布 老卡迎接3D

新特性方面:

1、Radeon HD 4000/3000系列显卡支持120Hz显示,也就是支持3D立体技术。

Leave a Comment

ATI 发布 10.4 for Linux 驱动

    2010年3月24日,ATI 发布 10.4 for Linux 驱动。

  • Changes to the color gamma value are now retained in Catalyst Control Center and reflected on the display after X-server restart
  • System will now resume properly after hibernation/suspend mode
  • Flickering corruption no longer observed while running OpenGL applications with CrossFire™ enabled
  • [RHEL4u8] DisplayPort display will now light up after being hotplugged
  • [SUSE 11.1] Enabling more than 4 single independent desktops no longer causes black screen hang on starting X

    下 载该驱动

    Release Notes

Leave a Comment

ATI 发布 10.3 for Linux 驱动

 2010年3月24日,ATI 发布 10.3 for Linux 驱动。

  • Corruption no longer observed after 90, 180 or 270 degree desktop rotation
  • CAL now properly reports the engine and memory clock when queried
  • [Ubuntu 9.04 x86 64-bit] X will no longer freeze during video playback under Dual-Head configuration
  • [Ubuntu 9.04] With one DP monitor and one DVI monitor connected in clone mode, unplugging and re-plugging the DVI monitor no longer causes the system to deadlock
  • [RandR 1.3] TV-out properties are no longer missing if TV is disconnected when X is started
  • X-server will now restart properly after enabling CrossFire
  • [SUSE 11.1 64-bit][Catalyst Control Center] Disabled display will now remain disabled after X-server restart
  • Display rotation can now be applied from Catalyst Control Center with desktop effects enabled
  • [RHEL] Enabling Xinerama will no longer cause input devices (keyboard and mouse) to become inaccessible after restarting X-server
  • System will now return to console mode after enabling all adapters and exiting X-server under multi-GPU configuration
  • Catalyst Control Center no longer reports error when two displays with different maximum resolutions are set in clone mode
  • [SUSE 11.1 64-bit] [SUSE 11.2 x86] CrossFire can now be enabled and will function properly
  • Scaling setting changes can now be retain after mode change, reboot or restarting X-server
  • [Ubuntu 9.04] Video output signals will now resume after monitor has been powered off and then back on
  • [Ubuntu 9.10] Fixed CAL runtime to eliminate segmentation faults  

    下载该驱动

    Release Notes

Leave a Comment

ATI 发布 10.2 for Linux 驱动

 2010年2月17日,ATI 发布 10.2 for Linux 驱动。

  • Corruption no longer observed after 90, 180 or 270 degree desktop rotation
  • CAL now properly reports the engine and memory clock when queried
  • [Ubuntu 9.04 x86 64-bit] X will no longer freeze during video playback under Dual-Head configuration
  • [Ubuntu 9.04] With one DP monitor and one DVI monitor connected in clone mode, unplugging and re-plugging the DVI monitor no longer causes the system to deadlock
  • [RandR 1.3] TV-out properties are no longer missing if TV is disconnected when X is started
  • X-server will now restart properly after enabling CrossFire
  • [SUSE 11.1 64-bit][Catalyst Control Center] Disabled display will now remain disabled after X-server restart
  • Display rotation can now be applied from Catalyst Control Center with desktop effects enabled
  • [RHEL] Enabling Xinerama will no longer cause input devices (keyboard and mouse) to become inaccessible after restarting X-server
  • System will now return to console mode after enabling all adapters and exiting X-server under multi-GPU configuration
  • Catalyst Control Center no longer reports error when two displays with different maximum resolutions are set in clone mode
  • [SUSE 11.1 64-bit] [SUSE 11.2 x86] CrossFire can now be enabled and will function properly
  • Scaling setting changes can now be retain after mode change, reboot or restarting X-server
  • [Ubuntu 9.04] Video output signals will now resume after monitor has been powered off and then back on
  • [Ubuntu 9.10] Fixed CAL runtime to eliminate segmentation faults  

    下载该驱动

    Release Notes

Leave a Comment

ATI 发布 10.1 for Linux 驱动

    2010年1月17日,ATI 发布 10.1 for Linux 驱动。

  • [ATI CatalystTM Control Center] Display Manager Properties tab now properly shows
  • a single mode instead of multiple modes when big desktop mode is enabled
  • The operating system will no longer fail when switching between virtual desktops
  • [RHEL 5.4 32-bit] [ATI CatalystTM Control Center] System now functions properly
  • after selecting "Detect Displays" button and hot-plugging a HDMI display
  • [Ubunut 9.10] X no longer fails after executing multiple Xserver generations with
  • Xinerama enabled
  • Hotplugging a HDMI monitor or toggling between LCD and HDMI no longer causes
  • the system to stop responding

    下载该驱动

    Release Notes

Leave a Comment

ATI 发布 9.12 for Linux 驱动

    12月17日,ATI 发布 9.12 for Linux 驱动。

  • [Ubuntu 9.04] Animated busy mouse cursor no longer disappears or flickers in Clone
  • mode
  • Corruption no longer occurs after hot plugging a display and doing a Virtual
  • Terminal switch
  • With CrossFire enabled, system no longer becomes unresponsive when switching to
  • DC (battery) mode with full-screen applications running
  • [SUSE 11.1] Unplugging the secondary display and terminating the X server (Ctrl +
  • Alt + Backspace) does not cause the primary display to become blank and display
  • corruption
  • Playing full screen Flash video on a secondary display no longer causes screen
  • corruption
  • Screen corruption no longer occurs when Open GL screen saver is enabled with
  • Desktop effects

    下载该驱动

    Release Notes

Leave a Comment

ATI 昨天发布 9.11 for Linux 驱动

    ATI 昨天发布 9.11 for Linux 驱动。

    可以看到发布日期是2009-11-17号,这次更新新增加了对RHEL 5.4和openSUSE 11.2 early look的支持,还修复了一些BUG。

 

  • [Ubuntu 9.04] Animated busy mouse cursor no longer disappears or flickers in Clone
  • mode
  • Corruption no longer occurs after hot plugging a display and doing a Virtual
  • Terminal switch
  • With CrossFire enabled, system no longer becomes unresponsive when switching to
  • DC (battery) mode with full-screen applications running
  • [SUSE 11.1] Unplugging the secondary display and terminating the X server (Ctrl +
  • Alt + Backspace) does not cause the primary display to become blank and display
  • corruption
  • Playing full screen Flash video on a secondary display no longer causes screen
  • corruption
  • Screen corruption no longer occurs when Open GL screen saver is enabled with
  • Desktop effects

Leave a Comment